So I got a bunch that I could write about in relation to 3d printing, I could even break these posts down but I will condense them a little instead.
What you see above is my oldest printer I recently wrote about brining it back to life, it was doing good for a while then I started to have issues again I was able to get it sorted but as you may notice if you seen the post something looks different with it, the control box is nowhere in sight and now the spool holder is on top of the printer instead of the control box.
Well with me recently starting to use my SLA resin 3d printed I needed to shift things around because it has a lid and I would not be able to take it off while it's under my hanging shelf that holds yet another printer.
The issue is that with the prusa (the orange printer below) it's a really tight squeeze to load and unload filament with the spool holder being on top of the printer, so I took of the mostly metal spool holder from my old printer and screwed it under my DIY printer bearing shelf.
This works great but leaves my old printer without a spool holder.
But that is not a problem I printed a spool holder for it as you can see in the picture above.
Now what about the control box for the old printer, well I mounted it on the bottom of the table, I found some models for a a mounting system however it was wonky so I quickly designed my own and printed it out and screwed it in, now I have more real-estate on my table
Here is a a close up of the new 3d printed spool holder it seems to do the trick however there is room for improvement.
I am also printing this guide/spool holder system it will take the place of the current spool holder with it moving away to the other side I will also print some extra pieces for it so together they will be able to hold 4 rolls of filament even though this printer can only print with one at a time, it would be a nice storage system for some rolls.
Currently 4 out of the 6 printers (not counting the resin printer that is working) are in working condition, the other 2 need some work I am sure I will get them sorted eventually, I also got another attachment for my latest printer for 8 material printing however that can of worms will be talked about in another post, I am a little disappointed but there is still hope.
August DUO HSBI Raffle
Prizes 3 prizes of 50 DUO each
Tickets Tickets are 1 HSBI each no limits to the amount of tickets you can purchase
Deadline August 30th 2024
Draw August 31st 2024
Bonus tickets You can also get 10 bonus tickets by writing a post about DUO!
More details in the Technical details section below
Technical details
To get a ticket send 1 Hive to @steembasicincome and put @duo-curator in the memo, after this be sure to leave a comments about your purchase in this post
The HSBI not only benefits you with life time upvotes on your posts, but also the curation account's posts. This means more income coming in, of which 90% is paid back to DUO stakers (200 min)and 10% is reinvested to compound the growth of the project.
As mentioned there is no limit to how many tickets you can get!
You can win more than one prize if you have enough tickets and lady luck is on your side !
Bonus tickets are limited to 10 per person
- Write a long form post 250 word minimum talking about DUO and this raffle and tag 5 of your active friends who might be interested in the project.
- Share a link to your post as a comment in this post
The draw will be conducted using the wheel of names and the winners will be announced in a DUO post and paid out on August 31st!
The founders will not be participating in this raffle to keep things fair
Original raffle post here
Reblog lottery
We got 31 participants for our reblog lottery this time around.
@angeluxx @blitzzzz @caspermoeller89 @chaosmagic23 @cositav @daddydog @daniasi @dgi @duckmotor @dynamicgreen @ecencypoints @ekads @ferod23 @henruc @hjrrodriguez @khantaimur @kungfukid @ladymisa @lolodens @middle-earthling @mxm0unite @olaf.gui @pepedook @pepetoken @revolverocelotyt @seki1 @stekene @trautenberk @vaynard86 @vrezyy and @ydm6669
and the winner this time around is....
Looks like a dud better luck next time !
@olaf.gui! Congratulations enjoy your 10% profit share on this post, 0.33 DUO tokens, 5 HBI units more about HBI units here
The reblog lottery continues so be sure to reblog this post to qualify, for a minimum 10% profit share, 0.33 DUO token and 5 HBI units (bonus wheel) on my next post
This is all done automatically and I apply the winner to be a beneficiary for the post.
Only reblogs before tomorrow 8pm Eastern Standard Time qualify for the lottery.
I am a financial advisor ! If you can't take personal responsibility for you investing, I hate to brake it to ya, but you ain't nothing but a sucka, you supposed to lose your shit.
@bitcoinman's bits of wisdom
- Invest only what you can afford to lose and be mindful of the potential risks.
- Unless you can accept delivery stay away from futures and stick to physical.
- Leverage is a great tool for losing money fast.
- Numismatics for the lows stick to smart stacking baby.
- Be cautious of new schemes in crypto, like ICOs, DeFi, and NFTs, do your research before investing.
BUY/SELL PRECIOUS METALS WITH HBD + PRECIOUS METALS TOOLS AND ACCESSORIES
Buy DUO and stake to receive Hive dividends, tip others, have your posts curated and grow Hive!
Learn more about DUO here
https://tribaldex.com/trade/DUO
https://hive-engine.com/trade/DUO
You can find out more about the #silvergoldstackers community in this post here
Weekly Post Schedule
| Day | Post |
|---|---|
| Monday | Art&3D |
| Tuesday | |
| Wednesday | |
| Thursday | |
| Friday | Stacker of the week |
| Saturday | Lazy Saturday post |
| Sunday |
Profit share
10% of this post earnings go to @olaf.gui for being our reblog lottery winner.
That's it for today's post thanks for stopping by your support is truly appreciated.
Posted Using InLeo Alpha
)
